CPVC Solvent Cements - Ultra Strong

Solvent cement fuses the CPVC material together, creating one uniformly bonded piece of thermoplastic. These fused joints also help the system maintain its life expectancy, heat distortion temperature, pressure rating, chemical resistance and safety qualities.
CPVC joints set and cure quickly at temperatures between 60- and 120-degrees Fahrenheit. A 1” pipe may set in as little as 15 minutes at 60 degrees but will take 30 minutes at lower temperatures. At temperatures under 40 degrees, a 3/4” pipe may take as long as two days to fully cure.

Curing Time:

• For Pressure upto 12.5 to 20 kg/sq. cm: 6-12 hrs
• For Pressure more than 20 kg/sq. Cm: 12-24 hrs

Application:

• Cut pipes square up to desired length and remove all burns from pipes. Clean and dry the entire joining surface with a clean & dry cloth.
• Apply CPVC Solvent Cement on the outer surface of the pipe and depth of sockets with brush provided with cap.
• Assemble the joint quickly while the cement is still wet. For better adhesion rotate pipe slightly and hold the joints for 60 to 90 seconds to avoid push out.
• Allow 15 minutes for good handling.